Tarbeveeboiler soojuspumbaga süsteemile SWP2N

Tarbeveeboiler soojuspumbaga süsteemile- 2 suure soojusvahetiga.

Täiendav suure pinnaga soojusvaheti. Sobib päikeseenergia süsteemide, küttesüsteemide ja soojuspumpade jaoks, kus on palju tarbijaid.

Energiasäästlikkus

Hea välimus

Lihtne paigaldus

Mugav ülevaatuseks

Lisaseadmed elektriküteks

Kõrge efektiivsusega isolatsioon ja PVC materjalist välimine kest RAL 9006 värvitoonis
Temperatuuri anduri paigaldusvõimalus erinevatesse kohtadesse
Komplekne korrosioonikaitse titaanemaili ja anoodkaitse abil
Kõik keermed on sisemised
Lihtne paigaldus
Mugav hooldusava
Kõrge efektiivsusega soojusvahetite mähised
Valikuline elektri küttekomplekt nimivõimsusega 3kW, 4,5kW, 6kW või 7,5kW

300, 400, 500, 750, 1000

Direktiiv 2010/30 /EL, määrus 812/2013:
Klass C maht alates 300 kuni 500 liitrit.

Parameetrid	Mõõtühikud	SWP2N 300	SWP2N 400	SWP2N 500
Capacity	L	300	400	500
Height	mm	1420	1490	1720
Diameter	D, mm	Ø 660	Ø 750	Ø 750
Insulation		50 mm rigid PU	50 mm rigid PU	50 mm rigid PU
Working pressure / Max. temperature	bar/°C	8/95	8/95	8/95
Test pressure	bar	13	13	13
El. Heater (optional)	kW	1 x (4.5)	1 x (6)	1 x (7.5)
Weight	kg	145	198	236
Cold water inlet	A, mm	Rp1”/215	Rp1/4 “/240	Rp11/2”/240
Hot water outlet	B, mm	Rp1”/1185	Rp1/4 ”/1240	Rp11/2”/1475
Recirculation	R, mm, Rp3/4”	Rp3/4” /1007	Rp1”/1105	Rp1”/1206
Working pressure / Max. temperature coils S1/S2	bar/°C	16/110	16/110	16/110
Pressure test coils S1/S2	bar	25	25	25
Capacity coils S1 /S2	L	6.5/16.1	10/18.9	11.8/26
Heat exchange surface coils S1/S2	m2	1.2/2.7	1.5/3.2	1.8/4.36
Inlet/outlet lower coil S1	S1i/ S1o, mm, Rp1”	485/215	562/240	606/240
Inlet/outlet upper coil S2	S2i/ S2o, mm, Rp1”	1105/587	1195/665	1428/726
Continuous power DIN 4708; 10°C/80°C/45°C, S1/S2	kW (m3/h)	53(1.30)/75(1.84)	62(1.52)/82(2.01)	72(1.77)/94(2.31)
NL – a power coefficient at 60°C, S1/S2	NL 60°C	11/17	14/22	18/29
Pressure loss Δp, S1/S2	Δp, mbar	55/70	70/85	90/120
Inspection opening/Flange	O, Ø, mm	Ø110×180/545	Ø110×180/620	Ø110×180/666
Sleeve for Electric heater flange cover	Uo, mm, Rp11/2”	545	620	666
Draining	Y, mm, Rp1”	30	30	30
Anode	P, mm, Rp11/4”	1410	1318	1575
Additional sensor sleeve	Z1/Z2/Z3, mm, Rp11/2”	325/697/1170	380/755/1155	380/858/1455
Venting	F, mm, Rp1”	1410	1480	1710
Sleeve for thermoregulator	G, mm, Rp1/2”	1095	1145	1453

Parameetrid	Mõõtühikud	SWP2N 750	SWP2N 1000
Capacity	L	741	900
Height	mm	2107	2018
Diameter without insulation/with insulation	D, mm	Ø 750/952	Ø 850/1052
Insulation		100 mm rigid PU	100 mm rigid PU
Operating pressure/Maximum temperature	bar/°C	8/95	8/95
Test pressure	bar	13	13
El. heater (optional)	kW	4 x (7.5)	4 x (7.5)
Weight with pallet and casing	kg	345	378
Cold water inlet	A, mm	Rp11/2”/295	Rp11/2”/319
Hot water outlet	B, mm	Rp11/2”/1789	Rp11/2”/1699
Recirculation	R, mm	Rp1”/1564	Rp1”/1486
Working pressure/Max. temp. coils S1/S2	bar/°C	16/110	16/110
Test pressure coils S1/S2	bar	25	25
Coils capacity S1 /S2	L	16.91/26.53	17.38/32.15
Heat exchange surface coils S1/S2	m2	2.59/4.04	2.66/4.85
Inlet/outlet lower coil S1	S1i/ S1o, mm	Rp1” 885/305	Rp1” 875/338
Inlet/outlet upper coil S2	S2i/ S2o, mm	Rp1” 1718/1115	Rp1” 1659/1057
Heat exchanger capacity at flow rate and temperature of the heat carrier 55°C, S1/S2	kW (m3/h)	S1 14.6(2.01) / S2 21.5(2.01)	S1 15.1(2.01) / S2 24.3(2.01)
Pressure loss Δp, S1/S2 (at a flow rate of 50 L)	Δp, mbar (m3/h)	164/181 (50)	80.3/106.2 (50)
Inspection opening/Flange	O, Ø, mm	Ø200×280/ 445	Ø200×280/ 459
Sleeve for Electric heater flange cover	Uo, mm	Rp11/2”/445	Rp11/2”/459
Draining	Y, mm	Rp1” 30	Rp1” 30
Anode	P1/Р2, mm	Rp11/4” 1886/998	Rp11/4” 1786/963
Additional sensor sleeve	Z1/Z2/Z3/Z4 mm	1625/1639/1035/445	1559/1499/1039/519
Venting	F, mm	Rp1”/2107	Rp1”/2018
Sleeve for thermoregulator	G, mm	Rp1/2”/1765	Rp1/2”/1698